October 23, 2010 9:00 AM CDT
The low-cost anchor consists of a solid Zinc Wing, Hotdip Wire Tie, and a screw. The low profile allows the wing to be installed before bricks are laid, complying with OSHA regulations for safety.
The pintle tie allows for an overall 2 1⁄2 inches of vertical adjustment and is slipped into the wing by the bricklayers for placement in the mortar joints.
The system complies with the ACI 530 Masonry code and the International Building Code. Seismic ties are available for seismic zones D, E, and F.
For more information visit www.heckmannbuildingprods.com.
Product Watch: Winged Wire Tie Brick Veneer Anchor
By Masonry
Winged wire tie brick veneer anchor from Heckmann Building Products.
The WWTA anchor for residential and commercial brick veneer construction is new from Heckmann Building Products.The low-cost anchor consists of a solid Zinc Wing, Hotdip Wire Tie, and a screw. The low profile allows the wing to be installed before bricks are laid, complying with OSHA regulations for safety.
The pintle tie allows for an overall 2 1⁄2 inches of vertical adjustment and is slipped into the wing by the bricklayers for placement in the mortar joints.
The system complies with the ACI 530 Masonry code and the International Building Code. Seismic ties are available for seismic zones D, E, and F.
For more information visit www.heckmannbuildingprods.com.
Originally published in Masonry magazine.
About the Author
Masonry, the official publication of the Mason Contractors Association of America, covers every aspect of the mason contractor profession - equipment and techniques, building codes and standards, business planning, promoting your business, legal issues and more. Read or subscribe to Masonry magazine at www.masonrymagazine.com.
