Amerimix
Cultured Stone
EZ Scaffold Corp.
EZG Manufacturing
Federated Insurance
Fraco USA, Inc.
Hydro Mobile, Inc.
Kennison Forest Products, Inc.
Keson/SOLA
Mortar Net Solutions
Non-Stop Scaffolding
Norton Clipper
Owens Corning
PROSOCO, Inc.
Southwest Scaffolding
SPEC MIX LLC
The Belden Brick Company
Tradesmen's Software, Inc.
Xtreme Manufacturing
May 20, 2022 2:15 PM CDT

Johnston And Joyner Are 2022's Masonry Hall Of Fame Inductees

Induction Ceremony To Take Place Wednesday, August 17th During The MCAA Midyear Meeting

By

CLICK HERE TO LEARN MORE ABOUT THE MASONRY HALL OF FAME

CLICK HERE TO LEARN MORE AND REGISTER FOR THE MCAA MIDYEAR MEETING
On Wednesday, August 17th, 2022 during the MCAA's Midyear Meeting, the Mason Contractors Association of America will induct two individuals into the Masonry Hall of Fame Presented By SOLA

The Masonry Hall of Fame was created to recognize and award those individuals who have dedicated their lives to the masonry industry. Each year, nominations are accepted to recognize individuals who have been a part of the masonry industry for 25 years or more and have had a major impact on the trade.

All inductees are nominated by their peers and carefully reviewed by a panel of judges. Nominees must receive two-thirds of the eligible votes in order to be accepted into the Hall of Fame. 

The 2022 Hall of Fame Inductees are Richard M. Johnston and Gary Joyner.

Richard M. Johnston, Johnston Construction Co., Inc.
Mike Johnston is a 2nd generation Mason Contractor. Johnston Construction Company, Inc. was incorporated in 1966, 56 years ago. Mike is one of few, if any, that holds a degree from the college of architecture at the University of Washington and a journeyman bricklayers card.

Mike began his involvement in local masonry industry and business organizations in the 1970’s. He immediately rose to a leadership position and served as President and Chief Wage Negotiator for the Tacoma/Pierce County Mason Constructors.

He later was elected a Trustee to the Washington State Conference of Mason Contractors and was instrumental in the development and creation of the Masonry Institute of Washington (MIW), eventually serving as its Chairman. Several years later Mike began getting involved at the national level with the MCAA attending conventions and educational programs. His invaluable experience and positive attitude has been a key to mentoring younger contractors and after having served as Regional Vice President for several terms (as did his father), he was elected President of the MCAA in 2000. During his tenure as President, he was involved in finance, conventions and the acquisition of the property that currently houses the MCAA office near Chicago.

Mike also served as President of the Associated Subcontractors of the State of Washington, Inc. from 1993 thru 1994. Additionally, Mike was invaluable to the Washington delegation in the 50 year lifecycle debate regarding MIL-CON project. 

From building code regulations to high lift grouting processes in Washington State, Mike has assisted our industry and our association in becoming a leader in quality masonry construction. 
Gary Joyner, Joyner Masonry Works, Inc.
Gary grew up in Goldsboro, North Carolina with his brother who was 6 years older. In Gary’s teen years he achieved the Rank of “Eagle Scout” also earning the “God and Country Award” and belonged to the “Order of the Arrow”. Gary now holds the NCMCA Certified Masonry Contractor Certificate and the NCMCA Certified Masonry Executive Certificate.

In 1971 Gary entered East Carolina University majoring in Industrial Arts with the intention of becoming a Wood-Shop Teacher. During his college years Gary took a sabbatical and answered a help wanted ad in the paper to become a Wheelbarrow Operator for a residential masonry contractor. He said he was plenty qualified and was good at it. After a few years Gary had gone back to college and decided that a Wood-Shop teacher would be too confining, so he went to work for a construction company as their Masonry Division Manager (Gary and his Laborer).

In 1978 Gary founded Joyner Masonry Works, Inc. primarily performing Residential Masonry construction. In 1981 Gary became involved with the North Carolina Masonry Contractors Association. That was the beginning of many changes for Gary and Joyner Masonry Works, Inc. as the move from Residential to Commercial Masonry Construction. Gary said that becoming involved in the NCMCA was the single most important experience and the turning point in his career. The knowledge he gained from the association with other mason contractors from around the State was immeasurable. In 1987 Gary was elected President of NCMCA and his involvement went through the roof. Gary was instrumental in developing the NCMCA Certification Program and served on the first Governing Board.

Gary regularly serves as a judge for various high school, Skills USA, and apprentice masonry contests. He is a strong advocate, recruiter and promoter of NCMCA’s Masonry Contractor Certification Program. Gary has been a presenter at events for the National High School Masonry Instructors Association, the Brick Industry Association Annual Brick Forum and other regional and national masonry promotional groups.

As the neighboring states South Carolina and Virginia have worked to develop and strengthen their own masonry contractor associations and recruitment and workforce development efforts. Gary has generously volunteered his time consulting with those state’s leaders offering his expertise and experience. In 1997 Gary was among the group that decided to make the bold move to open a fulltime NCMCA office with a fulltime executive manager. In 2012 Gary was the first person to be elected to a 2nd term as the NCMCA President. As Gary continued his involvement with the NCMCA. Gary was a very important and influential person who helped NCMCA take the next big step by creating a fulltime staff position for Workforce Development and Training Coordinator and helped spear head the search to hire Ryan Shaver to fill that position. This has been a long-sought after goal that has now been successfully accomplished. 

Gary remains very involved with the NCMCA but has now turned all that extra energy towards the MCAA. Gary has served on several National Committees and has been very active with the Legislative Committee traveling to Washington DC to meet with Congressman and Senators about Issues that affect our industry. Gary continues to serve as the Regional Vice President for Region B of MCAA. When the Masonry Foundation was formed Gary became very active in finding and acquiring many large donations for the foundation and has been responsible for a substantial portion of the funds raised to date. Gary now also serves as the Chairman of the foundation and continues to push to get those final dollars we need to meet our goal.

On a personal note, Gary married Shelly in 1974 and they have 2 son’s and 4 grandkids. Gary is very proud to tell you that Chris their oldest son is now President of Joyner Masonry Works, Inc and he also holds an NCMCA Masonry Executive Certificate, and their youngest son Nathan is a Doctor.


About the Author

The Mason Contractors Association of America (MCAA) is the national trade association representing mason contractors. The MCAA is committed to preserving and promoting the masonry industry by providing continuing education, advocating fair codes and standards, fostering a safe work environment, recruiting future manpower, and marketing the benefits of masonry materials.

 

Related Articles

More Masonry Headlines

“The MCAA is one of the most beneficial memberships that we have.”

Addison Kalish
Kalish Masonry, LLC
MCAA member since 2021

Learn More