FIND A CONTRACTOR BUYER'S GUIDE
BECOME AN INDUSTRY PARTNER
MCAA Logo
MEMBER LOGIN JOIN
NEWS
World of Concrete 2026 Competition Results ↗

Acme Brick reopens Denton Plant Kiln on 100th anniversary

Words: Artisan Tile company/Public/News/20120421073000-1.jpg" width="600" height="338" border="0" alt="Shown left to right are Nathan Taylor, Johnny Williams, James Steddum, Gregg Sublett, Ed Watson, Lynn Birchfield, Dennis Knautz, Jim Ogg, Garth Tayler and Brian Christenson." />
Shown left to right are Nathan Taylor, Johnny Williams, James Steddum, Gregg Sublett, Ed Watson, Lynn Birchfield, Dennis Knautz, Jim Ogg, Garth Tayler and Brian Christenson.
On Thursday, January 12, 2012, Acme Brick Company conducted the official reopening on kiln “C” at the company’s Denton, Texas plant. The reopening coincides with Acme’s 100th anniversary of the Denton plant’s acquisition by Acme Brick Company. Reopening ceremonies will begin at 10:00 a.m. Attending the event will be Dennis Knautz, President and CEO of Acme Brick Company and Ed Watson, Acme’s Senior Vice President of Production.

The Denton plant is the largest of Acme's 26 brick plants. First organized as the Denton Pressed Brick Company in 1901, the plant became Acme's first major acquisition on January 6, 1912.

The plant was expanded beginning in 1963 when the first of three new tunnel kilns was completed. The final kiln "C" kiln, was completed in 1967. Although it was the last kiln constructed, "C" kiln was deemed to be inoperable in 2009 due to structural issues. After a thorough review of options, Acme management made the decision in 2010 to rebuild the kiln in the same location and with the same basic configuration as the original kiln.

The kiln design and installation projects were all handled "in-house" by Acme Engineering and Production Management personnel. The kiln burners were ignited on December 21, 2011 and the first brick exited the kiln January 12, 2012, 100 years after the Denton operation became a part of Acme Brick Company.
 0
Brick Jointers: Purpose, Patterns, & Practical Applications
January 2026

After leads have been built and bricks have been laid, it’s crucial to tool the joints before the mortar sets. The tool of choice for this task is a brick jointer, but it can be tricky to decide which one to use. This guide will walk through the purpose o

Mackenzie Claassen
Technical Talks
Read More
Laying It Straight: Line-Holding Accessories for Masons Who Demand Precision
January 2026

When it comes to laying brick, block, or stone, nothing replaces a good line. A tight, true mason’s line is the backbone of straight courses and clean elevations, and the hardware holding that line is every bit as critical. Bon Tool’s lineup of Line & Lin

Paul Bender
Technical Talks
Read More
The Importance of Eye Protection in Masonry
January 2026

There are few stereotypes more iconic than the image of a construction worker wearing a hard hat and safety glasses. Protective glasses are among the most common items worn by workers in the masonry field, second only to the hard hat. According to OSHA, w

Justus Everett
Safety Library
Read More
2026 Skills Challenge and Fastest Trowel on the Block Winners
January 2026

Convention
Read More