Find a contractor Buyer's guide Partner with us
MCAA Logo
Log in Sign up Join Hi, there Account
2026 Midyear Registration is OPEN
Find a contractor Buyer's guide Partner
Log in Sign up Join Account

Heating Green

Words: Norberto Campos
/Public/News/20071107084600-1.jpg" width="200" height="300" border="0" alt="Masonry heaters are firing up green building practices.">
Masonry heaters are firing up green building practices.

Masonry heaters are firing up green building practices. A masonry heater is a unique type of masonry fireplace that is able to burn wood cleanly. By rapidly burning a large batch of wood (up to 60 pounds), the heater stores the heat in a masonry thermal mass. The masonry then radiates heat gently into the building for up to 24 hours or more from a single two-hour firing.

Several aspects of masonry heaters tie in directly to green building, including greenhouse gas reduction, low output capacity and radiant heat:

Greenhouse Gas Reduction
Wood is a renewable fuel, particularly if harvested as part of a sustainable forestry operation. The downside of burning wood is air pollution. Wood is potentially a clean fuel. Pollution from wood burning is almost entirely the result of incomplete (smoldering) combustion. It can be greatly reduced by improved burn methods, and masonry heaters achieve this by burning the wood rapidly in a hot fire and then using the masonry mass to store the heat. Chimney flues have been known to stay clean for 20 years and longer with proper operator practice.

Low Output Capability
In a large, 8,000-pound heater, the heat from a two-hour burn of 60 pounds of wood can be radiated into the building over a span of 24 hours, at roughly 10,000 BTUs per hour. In many locations, this is a typical heat load for a superinsulated building on an average day. Other cordwood burning appliances have difficulty targeting such low heat loads without resorting to smoldering (dirty) combustion.

Radiant Heat
A typical large heater will have about 100 square feet of radiating masonry surface at about 150 degrees farenheit. This is widely regarded as a comfortable and healthy type of heating, similar to what is obtainable with a hydronic floor. There is minimal air movement, and a reduction in dust circulation.
 0
Bonding with Masonry 2026: Q2
June 2026

This issue’s questions come from a Mason Contractor and an Engineer. What questions do you have? Send them to info@masonrymagazine.com, attention Technical Talk.

David Biggs
Bonding with Masonry
Read More
The Thirty-Year Mason: Ergonomics as a Retention Strategy
June 2026

In most industry circles, the conversation around the labor shortage follows a predictable script: How do we find the next generation of masons? While recruitment is vital, we often overlook the most valuable asset already on the job site: the experienced

Shayne Sanders
MAP Partner
Read More
Acme Brick Company Releases 2026 Pocket Guide to Brick Construction
June 2026

For more than four decades, all the basics of building with brick have come in a guide small enough to fit into a pocket. Acme Brick has just released a 2026 version of its Pocket Guide to Brick Construction. And yes, it’s still printed on paper just like

MAP Partner
Read More
Masonry in the Media: Casa Azul, Chapultepec Castle, & More
June 2026

A film’s settings can take viewers to new locations, all from the comfort of their own home. It immerses them in the scenes, whether they take place in an opera house in Brazil or a grand mansion in Mexico City. Explore how these Latin American masonry ma

Lily Burger
Masonry in the Media
Read More