Sparks May Fly Over Provisions in Electrical Safety Standards Proposed by OSHA

Words: Dan KesterOn June 15, OSHA proposed new and revised electrical safety standards. How do these standards impact you as a mason contractor? They don't - at least not directly. But you could very well be affected by the next OSHA standard which incorporates some of the provisions of this proposal. It should be of concern to every employer governed by OSHA standards.

To be more specific, under the proposed rule, OSHA would be able to cite a contract employer for failing to enforce any "safety-related work rule required by the host employer." While some host employers may welcome this initiative, in my view it is very troubling and probably violates the principles of due process under the Constitution.

I'm told that many general contractors already fine subcontractors for failure to comply with their specific safety rules; however, this is substantially different from getting an OSHA citation for violation of a private contract obligation - obligations which have simply been incorporated by reference into existing OSHA standards.

Under this rule, OSHA would require (1) the host employer to report (apparently in writing) any observed contract-employer related violations of the standards to the contract employer, and require the contract employer to advise the host employer (apparently in writing) of measures the contractor took to correct and prevent recurrences of violations reported by the host employer and (2) require the contract employer to advise the host employer (again, in writing) of any unanticipated hazards found during the contract employer's work that the host employer did not mention.

Talk about opening a huge can of worms!!!

If you were cited under this new standard and a dispute arose (no surprise there) about the citation, OSHA would need to review the contracts, change orders, etc. in order to settle the dispute. Just what you don't want or need. Many contracts are likely to contain ambiguous or conflicting provisions that OSHA would not be qualified to interpret. OSHA compliance officers can hardly interpret existing standards; they'd be completely baffled if they had to review construction contracts!

Comments on this proposed rule are due by October 13, 2005. You can be certain that MCAA will be filing comments in strenuous opposition to this absurd initiative and fight it every step of the way. We have enough controversy with OSHA as it is on multi-employer worksite liability issues. We've got to stop this type of approach dead in its tracks.

Brick Jointers: Purpose, Patterns, & Practical Applications
January 2026

After leads have been built and bricks have been laid, it’s crucial to tool the joints before the mortar sets. The tool of choice for this task is a brick jointer, but it can be tricky to decide which one to use. This guide will walk through the purpose o

Laying It Straight: Line-Holding Accessories for Masons Who Demand Precision
January 2026

When it comes to laying brick, block, or stone, nothing replaces a good line. A tight, true mason’s line is the backbone of straight courses and clean elevations, and the hardware holding that line is every bit as critical. Bon Tool’s lineup of Line & Lin

The Importance of Eye Protection in Masonry
January 2026

There are few stereotypes more iconic than the image of a construction worker wearing a hard hat and safety glasses. Protective glasses are among the most common items worn by workers in the masonry field, second only to the hard hat. According to OSHA, w

2026 Skills Challenge and Fastest Trowel on the Block Winners
January 2026