FIND A CONTRACTOR BUYER'S GUIDE
BECOME AN INDUSTRY PARTNER
MCAA Logo
MEMBER LOGIN JOIN
NEWS
The 2026 MCAA Annual Online Auction is Now Open ↗

Vertical rebar positioners

Words: Mike Ripley/Public/News/20120519070000-1.jpg" width="600" height="338" border="0" alt="Vertical rebar positioners aid the mason contractor in centering the bars in the core of the block." />
Vertical rebar positioners aid the mason contractor in centering the bars in the core of the block.
Vertical rebar positioners have been part of the masonry accessory package for many years. They add no structural value to the wall, but aid the mason contractor in centering the bars in the core of the block and also help to simplify the lapping process.

The most popular and economical positioners for vertical applications are the Figure 8 or S type and the O ring. They are installed perpendicular to the plane of the block crossing the core with the wire loops centered. Positioners are set in the mortar of the bed joint for stability and vertical spacing is about every four feet.

Placement tolerances for single rebar applications are listed in Specification for Masonry Structures (TMS 602-08/ACI 530.1-08/ASCE 6-08) under Part 3 — Execution 3.4 B.8. Working from the center point of the core you are allowed + ½ inch in the width or thickness of the wall and 2 inches along the length of the wall. This leaves you a space in the core center of 1 inch wide by 4 inches long to be code compliant for vertical applications.

Some masons install bars manually (by sight) and others with the aid of positioners but all with the risk of not meeting code. While the use of rebar positioners greatly narrows the margin of error, they also move during installation due to sitting on top of the shelf of the CMU and moving when mortar or the next course is applied.

A new trend in vertical rebar positioners has emerged to solve the movement issue during installation. Core inserted positioners, which are designed to fit 1½-inch deep, cross the core diagonally and fit tightly in the corners of the core. The core positioners perfectly position the bars in the code compliance zone and allow no movement during installation. They also have an extended tail section (safety bend) so if installed incorrectly (out of plane), the tail will extend outside the wall alerting the mason to turn it in the opposite position.

Double vertical core positioners are also available but with a different design, spacing the loops or guides closer to the face shell of the CMU. To complete the family there is a bond beam positioner that positions bars in the lower one-third of the unit and ½-inch off the inside face shell.

Take the guesswork out of rebar placement by using the core inserted positioners.
 0
A Legacy of Inspiration: Lynda Spina, CFO retires from STABILA North America
April 2026

After almost 30 years of dedicated service, Lynda Spina is retiring from her role as Chief Financial Officer of STABILA North America, closing an extraordinary chapter defined by steady leadership, financial discipline, and lasting impact.

Elsa Bueno
MAP Partner
Read More
Announcing The Daily Digest From The MCAA
April 2026

Pay attention to your inbox starting Wednesday, April 8th. The MCAA’s MASONRY STRONG Network is pleased to announce The Daily Digest, a selection of masonry news from around the world delivered right to you. “I receive daily emails from several news sou

Dan Kamys
Industry News
Read More
Turning Visualization into Opportunity: How Digital Design Tools Are Supporting Today’s Masonry Contractors
April 2026

Today’s homeowners are taking a proactive approach to planning and design. Before reaching out to a contractor, many clients spend hours researching products, comparing materials, and building inspiration boards online. By the time they request a quote,

Sarah Lograsso
MAP Partner
Read More
Smarter Time Tracking on the Jobsite: Introducing Geofence Notifications and Logging in CrewTracks
April 2026

For masonry contractors, time tracking is more than just a payroll task; it’s a key part of managing crews, understanding job costs, and keeping projects running smoothly. Yet many companies still struggle with one common challenge: making sure employees

Erin Koets
MAP Partner
Read More