A renovation in Toronto’s Yorkville neighborhood started with a stack of sketches from late architect Peter Cardew and a simple goal, finish what he started. After Cardew died in 2020, his daughter brought his drawings for a long-in-progress rowhouse overhaul to Scott & Scott Architects, led by David Scott, who had worked in Cardew’s Vancouver studio for years.
The building itself is a classic tight-site challenge, roughly 11 feet wide and part of a 13-home row from the 1880s that once housed workers tied to a nearby brickworks. From the street, the house reads like a brick rowhouse. Cardew’s design leaned into that history with a mostly solid, deep-red brick front, limited glazing, and an oak entry door pushed to one side to help open up floor area inside.
Cardew also carved tall voids through the four-story home to pull daylight deep into the plan. One void rises to a roof terrace at the front. Another cuts up through the center of the house to a clerestory window at the rear terrace. The finished interiors pair those big light moves with tight, built-in millwork in white oak, including seating and desk elements that keep circulation workable in a narrow footprint.
For mason contractors, one detail in the story stands out: the team originally planned to retain and repoint the original masonry, but the brick had shifted out of alignment over more than a century, making reuse difficult. Then, during a preliminary survey, the designers found the rowhouse was not structural masonry at all. It was timber construction with a brick front. That discovery drove the biggest redesign, with adjoining party walls taking on a larger structural role and creating niches and bump-outs in the kitchen and dining areas.
Read the full, original article from Architectural Record (subscription required at source) here.