Find a Contractor Buyer's Guide
MCAA Logo
Member Login JOIN
NEWS
Join Us For The 75th Anniversary Midyear Meeting Sep 7-11 ↗

Anchored Masonry Veneers

Words: Stephen GetzConstruction of the veneer on a brick veneer cavity wall relies on quality products and tradesmen to fulfill the design life and functional expectations of the owner and its occupants.

As part of the building's veneer design criteria, the brick tie anchoring system should be carefully evaluated and reviewed with consideration to the following:
  • Tie stiffness

  • Tie strength

  • Tie spacing

  • Fastener requirements

  • Air barrier interface

  • Material type and finish

  • Tie versatility
Construction of brick cavity walls tied to back-up materials other then masonry relies on a relatively stiff brick tie anchoring system for an optimum performing façade. The result minimizes excessive veneer deflection under wind load, which creates less potential for cracking of the veneer. Less cracking means less water migration into the cavity.

A tie illustrating good strength performance characteristics accommodates placement spacing greater than a typical 16- X 16-inch pattern as used with conventional plate and pintle ties, and increases the spacing area to 16 X 24 inches. This generous spacing would remain compliant with standard veneer wall construction requirements of the ACI 530/ASCE 5/TMS 402 criteria. It's important to note that when applying the greater spacing, the quantity of ties required is reduced by almost one-third, which generates a significant cost savings to the owner without compromise to the veneer's performance.

One must also consider a compatible fastener for the connection of the tie assembly to the stud-framing backup. A suitably designed brick anchoring system that utilizes a single fastener for its backup connection will provide a cost-effective installation and lessen the quantity of breaches in the air barrier by 50 percent over conventional ties. A quality Tek screw for steel stud or lag screw for timber connections is efficiently installed and available in material compatible to the anchor plate material.

Finally, the use of insulation in brick veneer cavity wall construction is a popular means to conserve building energy. A tie system must be adaptable for various wall configurations and accommodate insulation of varying thicknesses.

CTP Inc., for example, provides wall ties and anchors that illustrate tie stiffness three times that of conventional ties in the marketplace. The base plate can utilize a single screw fastener for 16-gauge metal stud and timber connections and is manufactured in sizes to bridge various insulation thicknesses. Spacing of the ties is recognized at the maximum permissible by code. The complete assembly is available in hot-dip galvanized or stainless steel finishes. The tie system also utilizes a proprietary multi-functional V-shaped tie that can be used for standard brick veneer construction, or be utilized with reinforcement for seismic applications. The installation is efficient and notably strong.
 0
From Bikes to Buildings: The Importance of Embracing Rainscreen Wall Designs and the New Building Codes.
July 2025

Have you ever been asked to do a project over the course of your lifetime? For example, when my kids were little, my wife asked me to assemble their bicycles. So, I opened the box, dumped out the contents, and cast aside whatever I thought was unnecessary

Keith Lolley
MAP Partner
Read More
Laying the Foundation for Growth: Concrete Masonry Checkoff Unveils Five-Year Vision for Industry
July 2025

The Concrete Masonry Checkoff (CMC) put the finishing touches on an ambitious five-year vision for the industry, targeting a 20% increase in market share, driven by increased demand for concrete masonry products. “This is about building exquisite, enduri

Industry News
Read More
Proudly American-Made: EZG Manufacturing’s Commitment to Quality, Innovation, and the U.S. Workforce
July 2025

As supply chain disruptions and tariff concerns continue to impact industries worldwide, EZG Manufacturing remains steadfast in its commitment to providing high-quality, innovative masonry equipment—proudly built in the U.S.A. For 25 years, our Malta, Ohi

Abigail Spung
Read More
Five of the Seven Chimneys Have Been Saved: Project Chimney Update
July 2025

In the wake of the devastating January wildfires that swept through Los Angeles's Pacific Palisades, a remarkable preservation effort is underway, spearheaded by Project Chimney, an initiative led by Evan Hall, founding director of the non-profit House Mu

Justin Stengel
Industry News
Read More