Find a Contractor Buyer's Guide
MCAA Logo
Member Login JOIN
NEWS
Join Us For The 75th Anniversary Midyear Meeting Sep 7-11 ↗

Moisture Management’s Front Line

Words: Jim CooperAdvancements in building technologies have produced both lighter-weight materials that help reduce initial construction costs and the ability to create tighter building envelopes, which can lower lifetime energy costs. As beneficial as these overall savings are, using such technologies poses the potential for moisture damage and associated costs down the road. Fortunately, the right combination of building technologies, products and installation techniques can net the benefits of efficiency and economics while also protecting against moisture damage.

Moisture or water vapor moves in and out of a building with air currents, by diffusion through the building’s materials, and through heat transfer. A building’s first line of defense is its exterior wall. Here, masonry is an excellent choice for moisture control, as long as it is installed in such a way as to both prevent the infiltration of water, and direct any water that does penetrate down the exterior cavity of the building.

Different masonry types will require different installation and moisture management techniques, but in general the National Concrete Masonry Association (NCMA) recommends the use of: flashing and counter-flashing, weeps, vents, sealants, water repellants, post-applied surface treatments, vapor retarders and crack control measures. The association also points to redundancy of components so the wall will remain watertight even if one of the systems fails.

One way to reduce the number of steps and materials necessary to achieve moisture control is for designers and builders to consider using properly detailed single-wythe walls. These eliminate the need for a cavity wall as backup. Most contain an integral water repellant (IWR), drainable cores and an interior face shell. Used with flashing and weeps and a post-applied water repellant, they can keep moisture out of the interior envelope.

Another way to install masonry while incorporating redundant moisture management strategies is by using complete masonry systems. These combine structures that more easily transport water vapor to minimize mold, mildew and potential structural damage and incorporate stainless steel ties that won’t rust or corrode, as well as drainage channels that send water down and away from the building. These systems also may be easier to install because they already combine many products into one.

Also important is the use of a proper ventilation system and avoidance of materials that aid in the growth of bacteria and mold, such as organic and paper-based products and wall-to-wall carpeting.

Water repellants, which are added to both manufactured stone veneers and mortar, are another high-performance solution for controlling moisture. Water-repellant admixtures are an integral part of a building’s moisture control strategy. They enhance other technologies that direct moisture down and away from a building by working to control the penetration of moisture in the first place.

Various water repellants can be applied to mortar or block, either at the jobsite or during production. However, jobsite applications have some limitations, including a surface life that averages two to seven years and the fact that they usually require applying two coats, which can cut into time and budget. Additionally, jobsite applications are subject to human error and nature’s wrath: if the blocks become wet prior to sealing, there could be future moisture issues. A complete moisture management solution should include the final step of sealing after the building’s completion.

On the other hand, IWRs or admixtures, such as the RainBloc System, are applied during the production of the mortar and/or block and are therefore factory controlled. They leave no surface film, won’t wear or wash off, and the masonry is breathable. Integrated water repellants are particularly effective in lightweight concrete masonry units and in single-wythe walls, where additional protection against water and wind-driven rain is needed.

For maximum benefit or extreme conditions, consider using block and mortar with integrated and applied water repellants together.

By using systems that combine water-resistant materials and technology to direct moisture down and away from the building, construction and masonry professionals can help safeguard their clients’ investments – and health – from the damaging effects of moisture.
 0
From Bikes to Buildings: The Importance of Embracing Rainscreen Wall Designs and the New Building Codes.
July 2025

Have you ever been asked to do a project over the course of your lifetime? For example, when my kids were little, my wife asked me to assemble their bicycles. So, I opened the box, dumped out the contents, and cast aside whatever I thought was unnecessary

Keith Lolley
MAP Partner
Read More
Laying the Foundation for Growth: Concrete Masonry Checkoff Unveils Five-Year Vision for Industry
July 2025

The Concrete Masonry Checkoff (CMC) put the finishing touches on an ambitious five-year vision for the industry, targeting a 20% increase in market share, driven by increased demand for concrete masonry products. “This is about building exquisite, enduri

Industry News
Read More
Proudly American-Made: EZG Manufacturing’s Commitment to Quality, Innovation, and the U.S. Workforce
July 2025

As supply chain disruptions and tariff concerns continue to impact industries worldwide, EZG Manufacturing remains steadfast in its commitment to providing high-quality, innovative masonry equipment—proudly built in the U.S.A. For 25 years, our Malta, Ohi

Abigail Spung
Read More
Five of the Seven Chimneys Have Been Saved: Project Chimney Update
July 2025

In the wake of the devastating January wildfires that swept through Los Angeles's Pacific Palisades, a remarkable preservation effort is underway, spearheaded by Project Chimney, an initiative led by Evan Hall, founding director of the non-profit House Mu

Justin Stengel
Industry News
Read More