Find a Contractor Buyer's Guide
MCAA Logo
Member Login JOIN
NEWS
Join Us For The 75th Anniversary Midyear Meeting Sep 7-11 ↗

Efflorescence: Efflorescence Questions and Answers

Words: Jeremy DouglasQ. I’ve been having a really difficult time lately getting rid of the efflorescence from my walls, starting about six months after the brick has been laid up. Is there any reason why I might be having such a hard time?

A. Without seeing exactly what you are experiencing, it’s hard to say what specifically is going on, but let’s start analyzing this issue from the beginning.

First, I feel it important to point out that not every white substance showing up on the face of a wall is efflorescence. Even in new construction, calcium deposits or lime run may also be the culprit, and is often mistaken for efflorescence. Sometimes the terms are used interchangeably, when in fact they are very different. It could well be that you are mistaking a calcium condition for common efflorescence, the calcium being much more difficult to remove.

The visible difference between the two is a direct comparison of their solubility. Efflorescence is a deposit of water-soluble salts that are actually driven through the masonry. Efflorescence presents on the wall face as a light, crystal-like powder, flaky to the touch and salty in taste. Because they are water-soluble salts, true efflorescence will disappear when wet.

Conversely, a calcium extrusion or lime run presents as a hard, crusty formation and is not soluble in water. Therefore, it remains visible even when wet. It is important to note that this calcium is going to be deposited from a water source that moves through a void, likely found in the mortar joint, such as a hairline crack where the brick and mortar interface each other. As the water flows and deposits the calcium over the same area again and again, the formation builds and becomes larger over time.

Efflorescence is almost inevitable in new construction, and most of the time will disappear on its own after the initial moisture sources have had an opportunity to dry and providing there is adequate ventilation in the wall cavity. One can use certain manufactured masonry cleaners to help alleviate the condition more quickly. However, I usually recommend against that because, during that process, we historically have had a tendency of driving more water to the wall, which may simply perpetuate the problem. Certain emulsions are manufactured to be sprayed over the efflorescence and left without rinsing, so they introduce less water to the brick surface if used correctly. All of these efflorescence cleaners are usually derived from a hydrochloric acid solution, so they must be used specifically as directed by the manufacturer.

Cleaning a series of calcium deposits is more difficult. Because of the hardness of the encrustation, it is more difficult for a wet solution to penetrate its crusty layer in order to soften the calcium for removal. A combination of multiple applications of a manufactured cleaner, as well as manually breaking the heavier encrustation apart, is usually required for the acids to complete their work. There are some acidic gels that may prove helpful in these scenarios, as they allow for a longer time on the calcium surface. Even so, I urge caution in working with anything acidic applied over long dwell times, and again recommend specifically following all manufacturer recommendations.

Simply put, if you’re cleaning something that is disappearing and returning later, you are dealing with efflorescence, and you must stop whatever the source of moisture is. If you are cleaning a white scaling condition that doesn’t go away no matter what you do, it is likely calcium, and you’re going to have to roll up your sleeves and apply a bit of elbow grease. Good luck.
About: Technical Talks
 0
Using Respirators for Silica Exposure
July 2025

Some in the masonry industry have expressed interest in respirator use as protection from harmful exposure to silica. This topic is of paramount importance due to its impact on our workers and the serious health effects of silica exposure. For those new t

Zach Everett
Read More
From Bikes to Buildings: The Importance of Embracing Rainscreen Wall Designs and the New Building Codes.
July 2025

Have you ever been asked to do a project over the course of your lifetime? For example, when my kids were little, my wife asked me to assemble their bicycles. So, I opened the box, dumped out the contents, and cast aside whatever I thought was unnecessary

Keith Lolley
MAP Partner
Read More
Laying the Foundation for Growth: Concrete Masonry Checkoff Unveils Five-Year Vision for Industry
July 2025

The Concrete Masonry Checkoff (CMC) put the finishing touches on an ambitious five-year vision for the industry, targeting a 20% increase in market share, driven by increased demand for concrete masonry products. “This is about building exquisite, enduri

Industry News
Read More
Five of the Seven Chimneys Have Been Saved: Project Chimney Update
July 2025

In the wake of the devastating January wildfires that swept through Los Angeles's Pacific Palisades, a remarkable preservation effort is underway, spearheaded by Project Chimney, an initiative led by Evan Hall, founding director of the non-profit House Mu

Justin Stengel
Industry News
Read More