FIND A CONTRACTOR BUYER'S GUIDE
BECOME AN INDUSTRY PARTNER
MCAA Logo
MEMBER LOGIN JOIN
NEWS
The 2026 MCAA Annual Online Auction ↗

Happy fall, y’all

Words: Jennifer MorrellAs we usher in fall, our first thoughts go to the staples of the season: football games; leaves turning shades of red, orange and brown; and — oh yes — winterizing your jobsite.

Winterizing your jobsite and equipment is no joke. Faulty, frozen equipment can be dangerous, and you don’t want to risk having your jobsite tools and equipment ruined by the elements.

Masonry magazine offers the following advice for keeping your work area and equipment operational and safe in winter. You can read the entire article at www.masonrymagazine.com/1-03/winter.html.

One piece of equipment you will be using in cold weather is the mortar mixer. Follow normal maintenance procedures throughout the year, and keep your mixer clean and properly maintained. Consider spraying your mixer prior to every use with concrete form oil or any type of environmentally safe oil, to help prevent mortar buildup and to allow accumulated ice to dislodge easier.

During freezing or near-freezing temperatures, change engine oil for a lower viscosity or a lower multiple viscosity, such as 5W-20. Store equipment inside a warm building when not in use. Under extreme conditions, start the engine and allow it to idle, while the equipment is being transported to the jobsite. Warm up all hydraulic equipment before use to prevent damage to the controls and lines, as cold hydro oil is thick and will resist a system.

Frozen precipitation brings its own brand of safety considerations for drivers. First and foremost, watch your traction. When driving the forklift on an ice-covered hill or road, assure appropriate traction exists for steering and stopping. And, remember the “three-point” rule: One foot and both hands must always be on the grips and steps.

As the temperatures drop, the need for safety heightens. Bear this in mind in all that you do on the jobsite. We wish you a happy and safe fall.
 0
Outreach Outlook: Springing into Action – The Season of Growth
March 2026

There is a distinct shift in the air when March arrives. You can feel it on the job sites, and you can certainly feel it in the classrooms. As the winter chill begins to lift and the days are a little longer, the construction industry naturally wakes up f

Robert Melgaard
Outreach Outlook
Read More
Chairman's Message: Laying the First Brick - A Fresh Start
March 2026

As we head into a new year, I’m excited and, honestly, grateful to step into the role of Chairman of the Mason Contractors Association of America. This industry has been good to my family, and I see this role as a chance to give back and help move things

Kent Huntley
Chairman’s Message
Read More
GEN NXT: 2026 Skills Challenge Winners
March 2026

After another successful year of the Skills Challenge, the MCAA had the opportunity to speak with the three 1st Place winners of each skill level. Get to know their journeys, motivations, and the mindsets they have in order to compete in a national compet

Justin Stengel
GEN NXT
Read More
2026 World of Concrete Recap
March 2026

The 2026 World of Concrete Convention marked another successful year for masonry. From the world-renowned Skills Challenge and Fastest Trowel on the Block competitions to the new innovative GEORGE AI class, we gained a lot of ground in pushing this indust

Justin Stengel
Industry News
Read More