Masonry Magazine January 1972 Page.35
PRODUCT
PROFIT
MAKERS
Deal Rolling Tower
Deal Products, Inc., manufacturer of tubular steel scaffolding, has introduced a new rolling tower designed for high above-the-floor jobs in maintenance and industry. Approved by Underwriters Laboratories, the tower meets all OSHA regulations and is constructed to the same standards of strength, durability and safety that have established Deal's reputation for steel scaffolding.
The tower includes guard railings and toe-board mountings on all four sides, caster brakes on all wheels and step-type end sections for safe, easy access to the platform from either side. Steps can also be used to adjust plank level for working at various heights. The tower is offered in heights of from 9 to 20 ft. and is assembled from standard Deal interchangeable components.
For more information write Deal Products, Inc., P.O. Box 667, 27th & Dearborn Sts., Easton, Pa. 18042.
Forklift Catalog
The Construction King forklifts offer 4,000 to 6,000 lb. lift capacity at heights from 10% to 28 ft. Designed to operate on both hard surfaces and rough terrain, the units feature four-speed torque converters with power shuttle, hydrostatic power steering, optional differential lock, right and left brake pedals, and high torque Case diesel or gasoline engines.
Request catalog UD62072B from any Case dealer or J1 Case Company, Construction Equipment Division, Racine, Wis. 53404.
Weatherbond Resin Paint
New Weatherbond Resin turns plain whitewash into a high quality white paint. When Weatherbond Resin is mixed with a common lime and water whitewash mix, it turns the whitewash into a tough durable white latex paint that won't wash off-won't chalk, flake or peel, and even outlasts other paints costing up to 5 times more. When mixed according to instructions, it is scrubbable and may be applied inside or out.
The finished point cost is 35 to $1.35 per gallon, depending on the quality of product desired and the amount of resin used.
For further information contact Bond Chemical Mfg., Inc., 118 N. W. 5th St., Fort Lauderdale, Fla. 33301.
Pow-R-Cut Saw
An all new, portable, gasoline engine-powered cut-off saw designed for fast cutting of tough materials has been introduced by the Power Products Division of DESA Industries, Inc., Park Forest, III.
The new Remington Pow-R-Cut makes fast, clean cuts through all types of construction materials including sheet metal, cement, concrete, asphalt, plastics and others. It is ideally adaptable for use by contractors and construction crews.
The new Pow-R-Cut has 40 per cent more power and a full 4" cutting capacity. A triple filter system assures longer engine life under critically dusty conditions. Operator comfort is increased with the new low-tone muffler and vibrationless cushion-comfort grips on the front and rear handles. The Pow-R-Cut weighs only 25 pounds.
If desired, the saw can be converted to a standard chain saw in a few minutes. It is available as a unit or as a complete kit. For additional information write DESA Industries, Inc., Power Products Division, 25000 S. Western Ave., Park Forest, III. 60466.
Target Hole Saw
Tile contractors, testing laboratories and manufacturing plants will find the new Hole Saw developed by Target a welcome addition to their production equipment for precision drilling in a wide range of materials. The Target Ceramic Hole Saw is a lightweight, portable, low-cost device capable of fast, accurate drilling of holes from 14" to 3" diameter, 3" deep, in all ceramic materials, glazed tile, glass, quarry tile and marble.
Powered by a 6 amp. motor with built-in water swivel and load indicating ammeter built into the switch box, the unit includes an automatic switch-actuated water valve. It is tub-mounted to catch water and cores, and for quick portability around the job site, laboratory or plant. For complete details, prices and specifications on Target Hole Saws and diamond drills, contact your Target distributor or write the Robert G. Evans Co., 4330 Clary Blvd., Kansas City, Mo. 64130.
Flat-side Wall Bucket
A new 18-qt. flat-side wall bucket is being offered by Fortex Enterprises, of 21 West St., New York, N.Y. 10006.
Called the 8600-18, the bucket is designed with a flat side to hang firmly against a wall without wobbling. It can be used for storing things and for many other industrial and construction functions, especially where safety is a factor.
The bucket cannot be crushed, nor can it rust, dent, spark or chip. It does not lose shape when rammed and is designed to take unusual abuse. The bucket is provided with a contoured bail which is shaped for slip-free, balanced hook-on.